The Kubota SSV65 is a popular mid-size skid steer built on Kubota's SSV-series platform. At 1,950 lb ROC with 18 GPM standard flow and optional 28 GPM high flow, it's a capable workhorse for farm and construction use — here's exactly what works.
The SSV65 is the smaller of Kubota's two SSV-series skid steers (the larger being the SSV75). It runs Kubota's V2607-CR-TE4 diesel engine at 64 HP gross (61.3 HP net) with Tier 4 Final certification. These are the factory specs for the SSV65 with standard tires and ROPS.
The SSV65 uses a standard SSQA (Standard Skid Steer Quick Attach) coupler — the most universal coupler geometry in the industry. This means:
Standard flow = 18 GPM, high flow = 28 GPM (if equipped). ROC = 1,950 lbs. Note: 18 GPM standard flow is lower than many competing machines at this weight class — pay attention to minimum GPM requirements on hydraulic attachments.
| Attachment | Compatibility | Notes |
|---|---|---|
| GP Buckets (dirt, gravel) | ✅ YES | 60–68" optimal for 1,950 lb ROC; rock buckets at lower fill density |
| Pallet Forks | ✅ YES | 1,950 lb ROC; standard 48" forks for most light pallet work |
| Bale Spears | ✅ YES | Handles mid-weight round bales; verify bale weight vs 1,950 lb ROC |
| Auger Drives | ✅ YES | Standard auger drives run at 18 GPM; size bits carefully — 9–12" for clay soils, up to 15" in sandy Prairie soils |
| Dozer / Angle Blades | ✅ YES | 78–90" width optimal for this frame |
| Grapples (root, rock, brush) | ✅ YES | Runs grapples; 54–66" widths suit the ROC; don't overload with dense material |
| Snow Pushers (box blades) | ✅ YES | 8'–10' optimal; passive pushers need no hydraulic flow |
| Power Rakes / Landscape Rakes | ✅ YES | Check minimum GPM on the specific rake — some require 16–18 GPM minimum; verify at 18 GPM |
| Landplanes / Box Blades | ✅ YES | 72–84" typical; passive attachment, no hydraulic flow required |
| Post Drivers (standard flow) | ✅ YES | Standard-flow post drivers run at 18 GPM; verify the specific model's minimum GPM |
| Cement / Concrete Mixers | ✅ YES | Drum mixers typically 10–16 GPM; 18 GPM sufficient for most models |
| Sweepers (angle brooms) | ✅ YES | Hydraulic brooms typically 12–16 GPM; 18 GPM covers most models |
| Trenchers (light-duty) | ✅ YES | Light-duty trenchers run at 18 GPM; verify weight vs ROC and confirm GPM spec |
| Hydraulic Breakers (small-mid) | ✅ YES | Small-to-mid breakers that run 10–18 GPM; check spec sheet for minimum flow |
| Attachment | Compatibility | Notes |
|---|---|---|
| Mulchers / Forestry Heads | HF REQUIRED | Light mulchers rated 22–28 GPM are possible with HF installed. The SSV65 is on the small side for mulching — expect reduced performance vs larger machines on dense brush |
| Snow Blowers (hydraulic) | HF REQUIRED | Most hydraulic snow blowers need 25–38 GPM; HF required |
| Rotary Cutters / Brush Cutters | HF REQUIRED | High-speed rotary motors typically need 25–35 GPM for full rated performance |
| Flail Mowers | HF REQUIRED | Commercial flail mowers typically require 22–35 GPM |
| Soil Conditioners / Tillers | HF REQUIRED | Full-size conditioners need 25–38 GPM; HF kit required |
| Cold Planers | HF REQUIRED | Even light cold planers start at 28+ GPM; at the SSV65's HF ceiling |
| Attachment | Compatibility | Weight Guidance |
|---|---|---|
| Stump Grinders | CHECK WEIGHT | Commercial stump grinders range 1,800–3,500 lbs. At 1,950 lb ROC, the SSV65 is limited to the lightest stump grinder units available. Most purpose-built stump grinders will be at or above ROC. The SSV75 is a better match for regular stump grinding work. |
| Heavy Trenchers | CHECK WEIGHT | Heavy trenchers easily exceed the SSV65's ROC. Stick to light-duty models rated for machines in this weight class. |
| Backhoe Attachments | CHECK WEIGHT | Mid-size backhoe attachments may approach or exceed the 1,950 lb ROC. Lighter units designed for compact machines are the better fit. |
The SSV65 is a compact machine at 66.5" overall width and 1,950 lb ROC. Size attachments to match — going too wide or too heavy reduces performance and stability.
Kubota SSV65 operators in Canada typically use the machine for farm operations, acreage work, and light construction. Kubota has a strong dealer network across Canada (Kubota Canada Ltd., headquartered in Markham, ON), which means parts and attachment support are accessible.
Standard 48" forks are the most practical SSV65 attachment for farm use. At 1,950 lb ROC, the SSV65 handles standard building supply pallets and mid-weight bales. For large bale work, confirm the bale weight — very large 1,800 lb round bales can push this machine to its limits.
60–68" GP dirt buckets are the most common choice. Canadian operators doing farmyard cleanup, gravel spreading, and light excavation work typically run a 66" bucket as the everyday attachment. Keep fill density in mind — dense gravel or wet clay quickly approaches the ROC at 1,950 lbs.
Post-hole drilling is one of the most practical uses for the SSV65 in rural Canada. The 18 GPM standard flow is adequate for most standard auger drives with bits up to 12". For Prairie fencing work in sandy soils, a 12–15" bit pairs well with this machine. In Ontario or BC clay, stick to 9–12" bits for clean drilling.
An 8'–10' passive snow pusher is the SSV65's sweet spot for small commercial and residential snow management. The machine's compact size and low ROC make it less suited for large parking lot work — but for rural lanes, small lots, and acreage driveways, the SSV65 with a 10' pusher is a proven combination.
If you're deciding between the SSV65 and the larger SSV75, the attachment capability difference matters:
Browse Canadian-sourced attachment listings that fit the Kubota SSV65.
Browse the Full Attachment Catalog →