Baumalight 6 Inch Skid Steer Auger Bit
🟡 High Flow
View on baumalight.com →
Overview
Baumalight manufactures a 6-inch auger bit for use with Baumalight auger drives on skid steers. A Canadian-made option from an Ontario manufacturer. The 6-inch bit handles small fence post holes and compact drilling applications. Available through Baumalight's Canadian dealer network.
Canada Availability
Canadian-manufactured by Baumalight (Ontario). Available through Baumalight dealers in Canada.
Key Facts
- Brand: Baumalight
- Bit diameter: 6 inches
- Type: skid steer auger bit
- Manufacturer: Ontario, Canada
- Application: small fence posts, compact drilling
- Typical bit weight: 18–28 lbs
- Hydraulic flow: determined by auger drive unit (typically 15–30 GPM standard flow, 30–45 GPM high-flow for large drives)
Is This Right For You?
✅ Buy if…
- You already have an auger drive unit and need the right bit for your soil type or hole diameter
- You drill specific hole sizes for fence posts, footings, or tree planting and need diameter variety
⛔ Skip if…
- You don't have an auger drive unit — a bit alone does nothing without a compatible drive motor
- Your soil is solid rock or hardpan — standard earth bits fail fast, you need a dedicated frost/rock bit
🔍 Also consider…
- Rock or frost auger bit if your ground is caliche, Shield rock, or frozen Prairie soil
- Auger drive unit if you don't yet have one compatible with your machine's hydraulic flow
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Baumalight in Canada
Baumalight is a Canadian manufacturer based in Ontario, producing forestry and land clearing attachments for Canadian conditions. Buying Baumalight means buying Canadian — local warranty support, parts, and engineering.
Care & Maintenance
- Grease the drive unit gearbox per the manufacturer's schedule — typically every 8 hours of operation; a starved gearbox is the most common cause of drive unit failure
- Inspect bit carbide teeth after every use in rocky or abrasive soil — worn or chipped teeth increase drive unit load and reduce penetration
- Replace a worn pilot bit before the main teeth wear — the pilot centers the bit and prevents wobble that stresses the drive unit gearbox
- Check hydraulic hose connections at the drive unit before each use — hose chafing in tight soil is a common failure point
- Store bits vertically or with exposed carbide protected — storing lying flat with unprotected carbide causes chipping from incidental contact
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/augers/baumalight-auger-bit-6-inch/
