Pengo 36-Inch Auger Bit for Skid SteersPremium
🟡 High Flow
View on pengoattachments.com →
Overview
The Pengo 36-inch auger bit is built for large-diameter excavation on high-torque skid steer drives — including major foundation piers, utility pole bases, and large tree transplanting operations. At 36 inches, this is one of the largest standard auger sizes available and requires a high-torque auger drive. Pengo, part of the Epiroc group, has produced drilling solutions for over 65 years and holds more than 70 industry patents across their product line. Available through Pengo dealers and equipment distributors across Canada.
Canada Availability
Available in Canada through Pengo dealers.
Key Facts
- Bit diameter: 36 inches
- Application: large piers and major foundations
- Mount: hex drive
- Typical bit weight: 110–160 lbs
- Hydraulic flow: determined by auger drive unit (typically 15–30 GPM standard flow, 30–45 GPM high-flow for large drives)
Is This Right For You?
✅ Buy if…
- You already have an auger drive unit and need the right bit for your soil type or hole diameter
- You drill specific hole sizes for fence posts, footings, or tree planting and need diameter variety
⛔ Skip if…
- You don't have an auger drive unit — a bit alone does nothing without a compatible drive motor
- Your soil is solid rock or hardpan — standard earth bits fail fast, you need a dedicated frost/rock bit
🔍 Also consider…
- Rock or frost auger bit if your ground is caliche, Shield rock, or frozen Prairie soil
- Auger drive unit if you don't yet have one compatible with your machine's hydraulic flow
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Pengo in Canada
Pengo is a US specialist manufacturer of auger bits and drives, known for earth and rock drilling performance. Their products are available through Canadian equipment dealers and are a respected choice for contractors and utilities requiring reliable auger tooling.
Care & Maintenance
- Grease the drive unit gearbox per the manufacturer's schedule — typically every 8 hours of operation; a starved gearbox is the most common cause of drive unit failure
- Inspect bit carbide teeth after every use in rocky or abrasive soil — worn or chipped teeth increase drive unit load and reduce penetration
- Replace a worn pilot bit before the main teeth wear — the pilot centers the bit and prevents wobble that stresses the drive unit gearbox
- Check hydraulic hose connections at the drive unit before each use — hose chafing in tight soil is a common failure point
- Store bits vertically or with exposed carbide protected — storing lying flat with unprotected carbide causes chipping from incidental contact
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/augers/pengo-auger-36in/
