Virnig Skid Steer Auger Drive
🟢 Standard Flow
View on virnig.com →
Overview
The wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil conditions ranging from sandy loam to hard clay. Virnig Manufacturing (Minnesota) is well regarded in Canada for heavy-duty skid steer attachments, available through Canadian equipment dealers. Carbide teeth cut efficiently and are replaceable when worn. Pairs with a hydraulic auger drive unit; check your machine's GPM output for compatibility. Available from Virnig Manufacturing (ships to Canada).
Canada Availability
Available from Virnig Manufacturing (ships to Canada).
Key Facts
- Brand: Virnig Manufacturing
- Type: hydraulic auger drive
- Drive: hydraulic motor
- Mount: universal SSQA quick attach
- Application: fence posts, footings, utility drilling
- Typical bit weight: 35–60 lbs
- Hydraulic flow: determined by auger drive unit (typically 15–30 GPM standard flow, 30–45 GPM high-flow for large drives)
Is This Right For You?
✅ Buy if…
- You drill post holes, footings, or tree holes regularly enough that buying beats renting
- Your skid steer's hydraulic output is matched to the drive unit — verify GPM range before buying
⛔ Skip if…
- You only drill occasionally — renting an auger package for $250–$400/day often wins over ownership at $3,000–$8,000 investment
- Your machine's GPM is outside the drive unit's rated range — running outside spec damages the motor
🔍 Also consider…
- A rental package first to confirm the right drive unit spec for your soil and machine
- Auger bits in multiple diameters — the drive unit investment only makes sense if you have the right bits to go with it
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Grease the drive unit gearbox per the manufacturer's schedule — typically every 8 hours of operation; a starved gearbox is the most common cause of drive unit failure
- Inspect bit carbide teeth after every use in rocky or abrasive soil — worn or chipped teeth increase drive unit load and reduce penetration
- Replace a worn pilot bit before the main teeth wear — the pilot centers the bit and prevents wobble that stresses the drive unit gearbox
- Check hydraulic hose connections at the drive unit before each use — hose chafing in tight soil is a common failure point
- Store bits vertically or with exposed carbide protected — storing lying flat with unprotected carbide causes chipping from incidental contact
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/augers/virnig-auger-drive/
