Berlon 72-Inch Skid Steer Salt and Sand Spreader🔵 Mid
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✓ Fits most skid steers, including small-frame
View on langnerequipment.ca →
Overview
Berlon's skid steer salt and sand spreader uses an auger-fed stainless steel spinner for consistent spread pattern control. Available in 60-inch (26 cubic feet) and 72-inch (32 cubic feet) sizes. The 72-inch model is priced at approximately $7,990 CAD through Langner Equipment in Canada. The stainless steel spinner resists corrosion from salt, extending the unit's lifespan in Canadian winter conditions.
Canada Availability
Available in Canada through Langner Equipment. The 72-inch model is approximately $7,990 CAD (verify current pricing).
Key Facts
- Working width: 72 inches
- Capacity: 32.0 cubic feet
- Feed: auger-fed
- Spinner: stainless steel for corrosion resistance
- Also available: 60-inch (26 cu ft) at approx. $7,590 CAD
- Application: salt and sand spreading on commercial lots
- SSQA universal quick attach
- Weight: 300–900 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
✅ Buy if…
- You apply sand or salt to icy or snowy surfaces as part of a snow removal contract
- You want a single attachment that works on a skid steer you already own
⛔ Skip if…
- You cover large distances — a dedicated spreader truck covers ground faster
- You spread liquid de-icer — these are dry material spreaders only
🔍 Also consider…
- Snow pusher if your primary task is pushing, not spreading
- A tow-behind spreader if a skid steer isn't your primary vehicle for this task
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Berlon in Canada
Berlon Industries builds attachments in Alberta, making them one of the few truly Prairie-made brands. Berlon products are engineered for Canadian conditions with local dealer support across Western Canada.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
⚠ Safety NoteBrooms are typically standard-flow (10-18 GPM). Angle brooms can swivel — set angle before engaging rotation.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/berlon-salt-sand-spreader-72/
.jpg)
