Blue Diamond 60-Inch Angle Broom Skid Steer
🟢 Standard Flow
View on bluediamondattachments.com →
Overview
Blue Diamond's 60-inch hydraulic angle broom suits compact to mid-size skid steers sweeping debris, snow, sand, and loose material on job sites, lots, and municipal applications. The broom angles hydraulically to direct swept material to the side during operation. Blue Diamond's angle brooms are available through their Canadian dealer network with dealer locations in every province. The 60-inch model is particularly suited for tighter spaces and smaller machines.
Canada Availability
Blue Diamond attachments available through Canadian dealers in every province.
Key Facts
- Working width: 60 inches
- Angle: hydraulic angling
- Drive: hydraulic
- Application: job site cleanup, snow, sand, loose debris
- Mount: universal SSQA skid steer quick attach
- Weight: 250–750 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
✅ Buy if…
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
⛔ Skip if…
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
🔍 Also consider…
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Blue Diamond in Canada
Blue Diamond Attachments manufactures in the USA and distributes widely into Canada. Known for heavy-duty construction and a broad catalog, Blue Diamond is a go-to brand for contractors who want North American-made quality.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/blue-diamond-angle-broom-60/
