Bobcat 48-Inch Angle Broom for Skid SteersPremium
🟢 Standard Flow
View on bobcat.com →
Overview
Bobcat's 48-inch angle broom is sized for mini skid steers and compact models working in tight spaces — warehouse aisles, loading docks, and indoor construction sites. The angled bristle drum rotates to windrow debris to one side. Available in hydraulic angle and fixed positions. Available through authorized Bobcat dealers in Canada.
Canada Availability
Available through Bobcat dealers across Canada.
Key Facts
- Working width: 48 inches
- Type: angle broom
- Application: indoor, tight spaces, warehouse, loading docks
- Mount: Bobcat Bob-Tach
- Hydraulics: aux required
- Weight: 225–675 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
✅ Buy if…
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
⛔ Skip if…
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
🔍 Also consider…
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
🔧 Machine Compatibility
Designed for Bobcat machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Bobcat in Canada
Bobcat is one of the most recognized skid steer brands in Canada, with a dealer presence in every province. Their OEM attachments are engineered specifically for Bobcat machines but use universal SSQA mounts for cross-brand compatibility.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/bobcat-angle-broom-48/
