John Deere Worksite Pro BR84 Rotary BroomPremium
🟢 Standard Flow
View on brandt.ca →
Overview
The BR84 is the widest rotary broom in the Worksite Pro lineup at 84 inches and 1,050 lb. It covers the same sweeping width as the BA84 angle broom but without hydraulic angle adjustment — fewer moving parts, lower cost, simpler maintenance. The right call for large commercial lots or construction sites where the sweeping direction is consistent and the operator doesn't need to angle the broom on the fly. For high-traffic commercial applications requiring continuous directional sweep adjustment, the BA84 angle broom is more productive. For a cleaner install with less hydraulic demand, the BR84 wins.
Canada Availability
Available in Canada through Brandt / John Deere Worksite Pro — dealer locations in BC, AB, SK, MB, and ON.
Key Facts
- Sweeping width: 84 inches
- Brush diameter: 25 inches
- Weight: 1,050 lb
- Type: rotary broom — cylindrical brush, sweeps without hydraulic angle adjustment
- Application: large commercial lots, construction sites, consistent-direction sweeping
- SSQA (universal skid steer quick attach) mount
- Compatible with mid-to-large frame skid steers and compact track loaders
Is This Right For You?
✅ Buy if…
- You need a fast, wide sweep of light debris on open hard surfaces
- Speed and coverage area matter more than containment
⛔ Skip if…
- You need the debris to go a specific direction — a rotary broom's discharge is less directional than an angle broom
- Fine material on wet surfaces may not clear as effectively
🔍 Also consider…
- Angle broom for directional sweeping and windrow control
- Pickup broom if material collection matters
🔧 Machine Compatibility
Compatible with compact track loaders and large-frame skid steers (S750+ class). Verify your machine's rated operating capacity (ROC) before ordering.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/john-deere-worksite-pro-br84-broom/
