Skid Pro 60-Inch Skid Steer Angle Broom
🟢 Standard Flow
View on skidpro.com →
Overview
Skid Pro's 60-inch hydraulic angle broom for skid steers sweeps construction site debris, spring road sand, and lot cleanup into a windrow for easy collection. The 60-inch width suits compact to mid-frame machines working in tighter areas. Available through Canadian equipment dealers and distributors shipping nationwide. A straightforward, competitively priced angle broom for Canadian seasonal and year-round cleanup work.
Canada Availability
Skid Pro attachments are available through Canadian equipment dealers and online distributors with Canadian shipping.
Key Facts
- Working width: 60 inches
- Type: hydraulic angle broom
- Drive: hydraulic brush rotation
- Application: construction debris, sand, lot sweeping
- Compatible: compact to mid-frame skid steers
- SSQA skid steer quick attach
- Weight: 250–750 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
✅ Buy if…
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
⛔ Skip if…
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
🔍 Also consider…
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Skid Pro in Canada
Skid Pro manufactures attachments in the USA and has a strong Canadian distribution footprint. Their catalog covers most common attachment types with a focus on durability and value for everyday contractor use.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/skid-pro-angle-broom-60/
