TMG-AB72 72-Inch Skid Steer Rotary Angle BroomBudget
🟢 Standard Flow
View on tmgindustrial.ca →
Overview
TMG Industrial's AB72 is a 72-inch rotary angle broom for skid steers with a 27-inch brush diameter and bi-directional operation. The standard-flow attachment sweeps construction sites, parking lots, and seasonal road sand. Sold direct to Canadian buyers through tmgindustrial.ca. The bi-directional brush allows adjustment for both left and right windrowing without swapping the broom position.
Canada Availability
Available direct from TMG Industrial Canada (tmgindustrial.ca) with Canadian shipping and free pickup at select locations.
Key Facts
- Model: TMG-AB72
- Working width: 72 inches
- Brush diameter: 27 inches
- Rotation: bi-directional (left or right windrow)
- Drive: standard hydraulic flow
- Application: construction cleanup, parking lots, road sand sweeping
- Universal SSQA skid steer quick attach
Is This Right For You?
✅ Buy if…
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
⛔ Skip if…
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
🔍 Also consider…
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/tmg-ab72-angle-broom/
