TMG-SAB36 36-Inch Angle Broom for Skid SteersBudget
🟢 Standard Flow
View on tmgindustrial.ca →
Overview
The TMG-SAB36 is a 36-inch hydraulic rotary angle broom for compact and mini skid steers. At 3 feet wide, it handles tight cleanup jobs on job sites, around buildings, and in yards where larger brooms won't fit. Bi-directional rotation sweeps debris to either side. Standard hydraulic flow, no high-flow upgrade needed. Available direct from TMG Industrial Canada with shipping across Canada.
Canada Availability
Available direct from TMG Industrial Canada (tmgindustrial.ca).
Key Facts
- Model: TMG-SAB36
- Working width: 36 inches
- Type: angle broom
- Application: construction cleanup, spring sand
- Mount: universal SSQA
- Weight: 225–675 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
✅ Buy if…
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
⛔ Skip if…
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
🔍 Also consider…
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
🔧 Machine Compatibility
Compact size fits small-frame machines (S70–S185 class) as well as mid and large-frame loaders. Universal SSQA mount works with all major brands.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/tmg-sab36-broom/
