TMG-SAB48 48-Inch Angle Broom for Skid SteersBudget
🟢 Standard Flow
View on tmgindustrial.ca →
Overview
The TMG-SAB48 is TMG Industrial's 48-inch angle broom — their most compact sweeper for mini skid steers and smaller machines working in tight spaces. Ideal for sidewalk clearing, shop floor sweeping, and confined commercial areas where a 60 or 72-inch broom is too wide. Poly and wire bristle options available. Sold direct from TMG Industrial Canada with Canadian shipping.
Canada Availability
Available direct from TMG Industrial Canada (tmgindustrial.ca) with Canadian shipping.
Key Facts
- Working width: 48 inches
- Model: TMG-SAB48
- Type: angle broom (compact)
- Application: sidewalks, shop floors, confined commercial areas
- Drive: hydraulic motor, angle adjustable
- Weight: 225–675 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
✅ Buy if…
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
⛔ Skip if…
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
🔍 Also consider…
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
🔧 Machine Compatibility
Compact size fits small-frame machines (S70–S185 class) as well as mid and large-frame loaders. Universal SSQA mount works with all major brands.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/tmg-sab48-broom/
