Bobcat 84-Inch Heavy Duty BucketPremium
View on bobcat.com →
Overview
Bobcat's 84-inch heavy duty bucket is built for demanding excavation on large-frame skid steers and CTLs. Constructed with AR400 wear plate on the bottom and side plates, a heavy bolt-on cutting edge, and reinforced side cutters. Suited to rock, shot gravel, road base, and packed clay where a standard GP bucket would deform. Available through Bobcat dealers in Canada.
Canada Availability
Available through authorized Bobcat dealers across Canada.
Key Facts
- Working width: 84 inches
- Construction: AR400 wear plate bottom and sides
- Cutting edge: heavy bolt-on replaceable
- Side cutters: reinforced
- Mount: Bobcat Bob-Tach
- Application: rock, shot gravel, road base, packed clay
- Typical weight: 520–680 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
✅ Buy if…
- You need one versatile bucket for gravel, soil, concrete chunks, and general debris
- Your machine is mid-frame (S450–S650 class) or CTL
⛔ Skip if…
- You work primarily in rock, frozen ground, or heavy demolition — a rock bucket handles that better
- You need clamshell/4-in-1 functionality
🔍 Also consider…
- Rock bucket if your primary work is shot rock or frozen ground
- 4-in-1 (multipurpose) bucket if you also need occasional grading or clamshell action
🔧 Machine Compatibility
Designed for Bobcat machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Bobcat in Canada
Bobcat is one of the most recognized skid steer brands in Canada, with a dealer presence in every province. Their OEM attachments are engineered specifically for Bobcat machines but use universal SSQA mounts for cross-brand compatibility.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/bobcat-heavy-duty-bucket-84/
