Bobcat 84-Inch Light Material Bucket🔵 Mid
✓ No hydraulics required
✓ Fits most skid steers, including small-frame
View on bobcat.com →
Overview
Bobcat's 84-inch light material bucket is a wide-mouth, high-sided bucket for large-volume moves of low-density material. Sized for large-frame skid steers doing compost, mulch, wood chip, and loose snow work. The high side walls increase per-pass volume without increasing cycle time. Available through Bobcat's Canadian dealer network.
Canada Availability
Available through authorized Bobcat dealers across Canada.
Key Facts
- Working width: 84 inches
- Type: high-capacity light material
- Application: mulch, compost, wood chips, loose material
- Mount: Bobcat Bob-Tach
- Compatibility: large-frame Bobcat skid steers and CTLs
- Typical weight: 520–680 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
✅ Specs sourced from bobcat.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You move high-volume, low-density material: mulch, wood chips, snow, or loose compost
- You want more cubic yards per pass without exceeding your machine's weight limit
⛔ Skip if…
- Your material is heavy (gravel, soil, rock) — the thin bucket walls will wear fast
- You need a bucket that doubles for digging or grading
🔍 Also consider…
- GP bucket if you split time between light and heavy material
- Snow pusher if snow moving is your primary winter task
🔧 Machine Compatibility
Designed for Bobcat machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Bobcat in Canada
Bobcat is one of the most recognized skid steer brands in Canada, with a dealer presence in every province. Their OEM attachments are engineered specifically for Bobcat machines but use universal SSQA mounts for cross-brand compatibility.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/bobcat-light-material-bucket-84/
