HLA 84-Inch Tooth Low Profile Skid Steer Bucket
View on hlaattachments.com →
Overview
HLA's 84-inch tooth low-profile bucket is priced at approximately $2,250 CAD through Langner Equipment. At 84 inches it handles large material movements efficiently on mid to large-frame machines for Canadian construction, road building, and farm work. Ontario-manufactured by Horst Welding in Listowel.
Canada Availability
Canadian-manufactured by Horst Welding (Listowel, ON). Available through HLA dealers and Langner Equipment at approximately $2,250 CAD.
Key Facts
- Working width: 84 inches
- Type: low-profile tooth bucket
- Bolt-on replaceable teeth
- Application: general construction, road building, large volume material
- Ontario-manufactured by Horst Welding
- SSQA skid steer quick attach
- Typical weight: 520–680 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
✅ Buy if…
- You break and move rock, frozen ground, or heavy demolition debris regularly
- You need a bolt-on cutting edge that's replaceable when worn
⛔ Skip if…
- Your work is mostly topsoil, gravel, and light debris — a GP bucket is lighter and faster
- You need a wider bucket — rock buckets max out around 84 inches for most machines
🔍 Also consider…
- GP bucket for general-purpose daily work
- Skeleton (rock sieve) bucket if you need to separate fines from rock
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/hla-lp-bucket-84-tooth/
