IronBull 60-Inch General Purpose Bucket for Skid Steers💚 Budget
✓ No hydraulics required
✓ Fits most skid steers, including small-frame
View on ironbull.ca →
Overview
The IronBull 60-inch general purpose bucket is a compact, heavy-duty skid steer bucket suited for working in tight spaces or lighter-frame machines. Built with high-strength steel and a reinforced cutting edge, it handles gravel, dirt, sand, and general material loading. IronBull ships direct to Canada with free ground shipping on most orders, making them a popular budget-friendly option for Canadian contractors.
Canada Availability
Available direct from IronBull Canada (ironbull.ca) with Canadian shipping included.
Key Facts
- Working width: 60 inches
- Type: general purpose bucket
- Construction: high-strength steel, reinforced cutting edge
- Application: gravel, dirt, sand, general material handling
- Mount: universal skid steer quick attach (SSQA)
- Typical weight: 350–450 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
✅ Specs sourced from ironbull.ca · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You need one versatile bucket for gravel, soil, concrete chunks, and general debris
- Your machine is mid-frame (S450–S650 class) or CTL
⛔ Skip if…
- You work primarily in rock, frozen ground, or heavy demolition — a rock bucket handles that better
- You need clamshell/4-in-1 functionality
🔍 Also consider…
- Rock bucket if your primary work is shot rock or frozen ground
- 4-in-1 (multipurpose) bucket if you also need occasional grading or clamshell action
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About IronBull in Canada
IronBull attachments are distributed across Canada through online and dealer channels, offering competitive pricing on workhorse models suited to farm, construction, and municipal use.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/ironbull-gp-bucket-60/
