John Deere 72-Inch Light Material Bucket for Skid Steers in Canada🔵 Mid
✓ No hydraulics required
✓ Fits most skid steers, including small-frame
View on brandt.ca →
Overview
The 72-inch-inch bucket is purpose-built for skid steers and compact track loaders working in construction, farm, earthmoving. John Deere Worksite Pro attachments are stocked and supported by Brandt and John Deere dealers at over 100 locations across Canada. Features a replaceable cutting edge and universal SSQA mount for broad machine compatibility. Available in Canada through Brandt and John Deere Worksite Pro dealers.
Canada Availability
Available in Canada through Brandt and John Deere Worksite Pro dealers.
Key Facts
- Type: 72-inch light material/high-capacity bucket
- Application: construction, farm, earthmoving
- Mount: John Deere quik-tach / universal SSQA
- Typical weight: 430–560 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
✅ Specs sourced from brandt.ca · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You move high-volume, low-density material: mulch, wood chips, snow, or loose compost
- You want more cubic yards per pass without exceeding your machine's weight limit
⛔ Skip if…
- Your material is heavy (gravel, soil, rock) — the thin bucket walls will wear fast
- You need a bucket that doubles for digging or grading
🔍 Also consider…
- GP bucket if you split time between light and heavy material
- Snow pusher if snow moving is your primary winter task
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/john-deere-light-material-bucket-72/
