John Deere Worksite Pro CB78 Construction Bucket🔵 Mid
✓ No hydraulics required
View on brandt.ca →
Overview
At 78 inches wide and 521 lb, the CB78 is a large construction bucket built for high-capacity skid steers and CTLs where moving volume quickly is the priority. The 78-inch span covers a wide swath per pass on open sites — useful for bulk material movement, road building, and aggregate handling. Same CB series construction throughout: mild steel, low back plate for visibility, rounded interior for clean dump cycles, and pre-drilled holes for cutting edge or tooth bar upgrades. For operators who need the volume of a 78 but don't want to go all the way to 84.
Canada Availability
Available in Canada through Brandt / John Deere Worksite Pro — dealer locations in BC, AB, SK, MB, and ON.
Key Facts
- Working width: 78 inches (198 cm)
- Application: general construction, loading, grading, material handling
- Weight: 521 lb
- Material: mild steel construction
- Low back plate for improved operator visibility
- Rounded interior for better fill and dump performance
- Pre-drilled for cutting edge and tooth bar
- SSQA (universal skid steer quick attach) mount
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
✅ Specs sourced from brandt.ca · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You break and move rock, frozen ground, or heavy demolition debris regularly
- You need a bolt-on cutting edge that's replaceable when worn
⛔ Skip if…
- Your work is mostly topsoil, gravel, and light debris — a GP bucket is lighter and faster
- You need a wider bucket — rock buckets max out around 84 inches for most machines
🔍 Also consider…
- GP bucket for general-purpose daily work
- Skeleton (rock sieve) bucket if you need to separate fines from rock
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/john-deere-worksite-pro-cb78-bucket/
