John Deere Worksite Pro GP60 General Purpose Bucket🔵 Mid
✓ No hydraulics required
✓ Fits most skid steers, including small-frame
View on brandt.ca →
Overview
The GP60 is John Deere's 60-inch general purpose bucket in the Worksite Pro line — designed for small-frame skid steers and compact CTLs where a wider bucket would exceed the machine's rated operating capacity or simply not fit the work area. The general purpose design handles everyday mixed material: dirt, sand, gravel, and light aggregate. Bolt-on cutting edge for field replacement. At 60 inches, this bucket is a common match for the lower end of the mid-frame machine class and small-frame units. Available in Canada through Brandt.
Canada Availability
Available in Canada through Brandt / John Deere Worksite Pro dealers.
Key Facts
- Working width: 60 inches
- Type: general purpose — for mixed non-abrasive material
- Cutting edge: bolt-on, field replaceable
- Application: dirt, gravel, sand, light aggregate on standard job sites
- Suited to small-frame and compact skid steers
- SSQA (universal quick attach) mount
- Compatible with small-frame John Deere skid steers and CTLs
- Typical weight: 350–450 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
✅ Specs sourced from brandt.ca · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You need one versatile bucket for gravel, soil, concrete chunks, and general debris
- Your machine is mid-frame (S450–S650 class) or CTL
⛔ Skip if…
- You work primarily in rock, frozen ground, or heavy demolition — a rock bucket handles that better
- You need clamshell/4-in-1 functionality
🔍 Also consider…
- Rock bucket if your primary work is shot rock or frozen ground
- 4-in-1 (multipurpose) bucket if you also need occasional grading or clamshell action
🔧 Machine Compatibility
Compatible with compact track loaders and small-frame skid steers (S70–S185 class). Universal SSQA mount works with all major brands.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/john-deere-worksite-pro-gp60-bucket/
