Kubota Skid Steer 4-in-1 Combination Bucket🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on kubota.ca →
Overview
Kubota's 4-in-1 combination bucket is available for SSV and SVL series machines. Used by Canadian construction and farm contractors who need a versatile single attachment for digging, levelling, clamping, and carrying. Kubota dealers across Canada provide parts and service support.
Canada Availability
Available through Kubota dealers across Canada.
Key Facts
- Brand: Kubota Tractor Corporation
- Type: hydraulic 4-in-1 combination bucket
- Functions: bucket, dozer, clam, grapple
- Drive: hydraulic cylinders
- Mount: Kubota quick attach (SSQA compatible)
- Application: versatile construction and agricultural use
- Typical weight: 450 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
✅ Specs sourced from kubota.ca · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You want one bucket that can grab, grade, spread, and load without switching attachments
- You do finish grading or move loose material piles on the same site
⛔ Skip if…
- Your priority is capacity and speed — a GP bucket moves more per cycle
- The added weight of the 4-in-1 mechanism pushes you near your machine's ROC limit
🔍 Also consider…
- GP bucket if capacity per cycle is more important than versatility
- Industrial grapple if bulk debris handling is a bigger priority than bucket work
🔧 Machine Compatibility
Designed for Kubota machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Kubota in Canada
Kubota attachments are available through the Kubota dealer network across Canada, which covers most provinces. If you run Kubota compact equipment, same-brand attachments provide the best hydraulic compatibility and your local dealer handles both machine and attachment support under one roof.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
More from Kubota
Brooms
Kubota Skid Steer Angle Broom
The wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,…
View product →
Augers
Kubota Skid Steer Auger Drive
The wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil…
View product →
Cement Mixers
Kubota Skid Steer Cement Mixer Attachment
Kubota's skid steer cement mixer is designed for SSV and SVL series machines, using the…
View product →
Dozer Blades
Kubota Skid Steer Dozer Blade
The wide-inch dozer blade pushes gravel, soil, snow, and debris across yards, driveways,…
View product →
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/kubota-4-in-1-bucket/
