Langner 60-Inch Gravel Spoon Skid Steer Bucket🔵 Mid
✓ No hydraulics required
✓ Fits most skid steers, including small-frame
View on langnerequipment.ca →
Overview
Langner's 60-inch gravel spoon holds 0.35 cubic yards and is priced at $2,390 CAD. Built with Grade 50 steel, dual wear bars, gusseted body, and dual safety steps — the same premium construction as their 84-inch model but sized for mid-frame machines and tighter work areas. Canadian-manufactured and available direct from Langner Equipment.
Canada Availability
Canadian-manufactured by Langner Equipment. Available direct from Langner Equipment at $2,390 CAD.
Key Facts
- Working width: 60 inches
- Capacity: 0.35 cubic yard
- Material: Grade 50 steel
- Dual wear bars and gusseted body
- Application: gravel, aggregate, narrow driveways
- SSQA universal quick attach
- Typical weight: 350–450 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
✅ Buy if…
- You break and move rock, frozen ground, or heavy demolition debris regularly
- You need a bolt-on cutting edge that's replaceable when worn
⛔ Skip if…
- Your work is mostly topsoil, gravel, and light debris — a GP bucket is lighter and faster
- You need a wider bucket — rock buckets max out around 84 inches for most machines
🔍 Also consider…
- GP bucket for general-purpose daily work
- Skeleton (rock sieve) bucket if you need to separate fines from rock
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Langner Equipment in Canada
Langner Equipment is a Canadian dealer and supplier of specialty skid steer attachments including gravel spoon buckets and other niche tools. As a Canadian operation, they offer direct supply to contractors looking for domestic availability on hard-to-find attachment types.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
More from Langner Equipment
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/langner-gravel-spoon-bucket-60/
