Paladin Attachments 4-in-1 Skid Steer Bucket💚 Budget
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on paladin-brands.com →
Overview
The wide-inch bucket is purpose-built for skid steers and compact track loaders working in grading, excavation, and material handling. Paladin Attachments attachments are available through Canadian equipment dealers and distributors. Features a replaceable cutting edge and universal SSQA mount for broad machine compatibility. Available through Paladin Attachments dealers across Canada.
Canada Availability
Available through Paladin Attachments dealers across Canada.
Key Facts
- Brand: Paladin Attachments
- Type: hydraulic 4-in-1 combination bucket
- Functions: bucket, blade, clamshell, grapple
- Drive: hydraulic cylinders
- Mount: universal SSQA quick attach
- Typical weight: 450 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
✅ Buy if…
- You want one bucket that can grab, grade, spread, and load without switching attachments
- You do finish grading or move loose material piles on the same site
⛔ Skip if…
- Your priority is capacity and speed — a GP bucket moves more per cycle
- The added weight of the 4-in-1 mechanism pushes you near your machine's ROC limit
🔍 Also consider…
- GP bucket if capacity per cycle is more important than versatility
- Industrial grapple if bulk debris handling is a bigger priority than bucket work
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Paladin Attachments in Canada
Paladin Attachments — now part of Epiroc — manufactures under multiple brands including Bradco, McMillen, and Sweepster. Their products are distributed across North America with Canadian dealers stocking common models.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
More from Paladin Attachments
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/paladin-4-in-1-bucket/
