Paladin Bradco Heavy-Duty Construction Bucket 84 Inch💚 Budget
✓ No hydraulics required
✓ Fits most skid steers, including small-frame
View on paladinattachments.com →
Overview
Paladin's Bradco heavy-duty construction series bucket is available in 75, 80, and 84-inch widths — 38 inches long and 25 inches high. A large-volume, heavy-duty tooth bucket suited for large-frame skid steers on construction sites and site development. Distributed in Canada through Langner Equipment and other Paladin dealers. Available in both tooth and smooth configurations.
Canada Availability
Available through Langner Equipment and other Paladin/Bradco dealers in Canada.
Key Facts
- Working width: 84 inches (also 75", 80")
- Bucket dimensions: 38" long × 25" high
- Type: heavy-duty construction bucket
- Available in tooth or smooth
- Application: large-frame machines, construction, site development
- SSQA universal quick attach
- Typical weight: 520–680 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
✅ Buy if…
- You break and move rock, frozen ground, or heavy demolition debris regularly
- You need a bolt-on cutting edge that's replaceable when worn
⛔ Skip if…
- Your work is mostly topsoil, gravel, and light debris — a GP bucket is lighter and faster
- You need a wider bucket — rock buckets max out around 84 inches for most machines
🔍 Also consider…
- GP bucket for general-purpose daily work
- Skeleton (rock sieve) bucket if you need to separate fines from rock
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Paladin Attachments in Canada
Paladin Attachments — now part of Epiroc — manufactures under multiple brands including Bradco, McMillen, and Sweepster. Their products are distributed across North America with Canadian dealers stocking common models.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
More from Paladin Attachments
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/paladin-bradco-construction-bucket-84/
