Paladin FFC 60-Inch General Purpose Bucket for Skid Steers💚 Budget
✓ No hydraulics required
✓ Fits most skid steers, including small-frame
View on paladinlightconstruction.com →
Overview
The Paladin FFC 60-inch general-purpose bucket is a mid-frame skid steer bucket for excavation, material handling, and construction work. Part of Paladin's standard-flow D-series line flowing 15-27 gpm, available with or without a backdrag edge. The 60-inch model weighs approximately 860 lbs without backdrag. Paladin is the world's largest independent attachment manufacturer with a broad Canadian dealer network. Universal SSQA mount. A proven commercial-grade bucket for demanding Canadian job sites.
Canada Availability
Available in Canada through Paladin FFC dealers.
Key Facts
- Working width: 60 inches
- Application: general excavation, material handling
- Cutting edge: replaceable
- Mount: universal SSQA
- Typical weight: 350–450 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
✅ Buy if…
- You need one versatile bucket for gravel, soil, concrete chunks, and general debris
- Your machine is mid-frame (S450–S650 class) or CTL
⛔ Skip if…
- You work primarily in rock, frozen ground, or heavy demolition — a rock bucket handles that better
- You need clamshell/4-in-1 functionality
🔍 Also consider…
- Rock bucket if your primary work is shot rock or frozen ground
- 4-in-1 (multipurpose) bucket if you also need occasional grading or clamshell action
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Paladin FFC in Canada
Paladin FFC is a product line under Paladin Attachments (an Epiroc subsidiary), offering a wide variety of skid steer and compact loader attachments across North America. Their products are available through Canadian equipment dealers with Epiroc's parts and support infrastructure.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/paladin-ffc-gp-bucket-60/
