TMG-SBF108 108-Inch Skid Steer BucketBudget
View on tmgindustrial.ca →
Overview
TMG Industrial's SBF108 is a wide-format 108-inch flat-bottom bucket for large-frame skid steers, designed for bulk material moving, site grading, and backfill on open sites. At 108 inches, it suits large machines pushing significant material volume per pass. Available directly from TMG Industrial Canada with Canadian shipping and warehouse pickup. Useful for municipal yards, landscaping contractors, and oilfield site work.
Canada Availability
Available directly from TMG Industrial Canada (tmgindustrial.ca) with Canadian shipping and pickup at select locations.
Key Facts
- Model: TMG-SBF108
- Working width: 108 inches
- Type: flat-bottom general purpose bucket
- Application: bulk material, site grading, backfill
- Compatible: large-frame skid steers
- Universal SSQA skid steer quick attach
- Typical weight: 600–800 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
✅ Buy if…
- You need one versatile bucket for gravel, soil, concrete chunks, and general debris
- Your machine is mid-frame (S450–S650 class) or CTL
⛔ Skip if…
- You work primarily in rock, frozen ground, or heavy demolition — a rock bucket handles that better
- You need clamshell/4-in-1 functionality
🔍 Also consider…
- Rock bucket if your primary work is shot rock or frozen ground
- 4-in-1 (multipurpose) bucket if you also need occasional grading or clamshell action
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/tmg-sbf108-bucket/
