TMG Industrial TMG-SBF72 72" 4-in-1 Bucket💚 Budget
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on tmgindustrial.com →
Overview
The TMG-SBF72 is a 72-inch 4-in-1 skid steer bucket that functions as a standard GP bucket, a bottom-opening clamshell, a dozer blade, and a material scraper. The NM400 steel cutting blade is a hardened wear steel grade rated for abrasive materials. Bucket capacity is 12.25 cubic feet (0.35 m³) and maximum load is 1,545 lbs. The 30-inch jaw opening handles most common tasks when used in clamshell mode—grading soil, picking up debris, or carrying and dumping loose material without needing to reposition. Hydraulic flow connects via NPT ½-inch flat quick connectors. At 700 lbs it fits mid-frame and larger machines without eating into their usable payload.
Canada Availability
TMG Industrial ships from Richmond, BC. National shipping available across Canada.
Key Facts
- Working width: 72 inches
- Application: snow removal, grain handling, light bulk materials, farm use
- Weight: 700 lbs
- Bucket capacity: 12.25 cu ft (0.35 m³)
- Load capacity: 1,545 lbs
- Jaw opening: 30 inches
- Cutting blade: NM400 hardened wear steel
- Hydraulic pressure: Up to 250 BAR (3,626 PSI)
- Couplers: NPT ½-inch flat quick connectors
- Mount: Universal SSQA
- Function modes: GP bucket, clamshell, dozer blade, material scraper
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
✅ Buy if…
- You want one bucket that can grab, grade, spread, and load without switching attachments
- You do finish grading or move loose material piles on the same site
⛔ Skip if…
- Your priority is capacity and speed — a GP bucket moves more per cycle
- The added weight of the 4-in-1 mechanism pushes you near your machine's ROC limit
🔍 Also consider…
- GP bucket if capacity per cycle is more important than versatility
- Industrial grapple if bulk debris handling is a bigger priority than bucket work
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/tmg-sbf72-4in1-bucket/
