TMG Industrial TMG-SN84 84" Snow and Mulch BucketBudget
View on tmgindustrial.com →
Overview
The TMG-SN84 is an 84-inch snow and mulch bucket for year-round light material handling. The high side walls contain loads at full capacity and act as a natural leveler, while rear cutouts preserve operator sightlines. Interior rib reinforcement adds structural rigidity without adding unnecessary weight. A bolt-on high-tensile steel cutting edge scrapes close to the pavement surface for a clean finish on commercial lots. Rated to 1,500 lbs, it suits snow removal, wood chip hauling, and mulch spreading on farms, commercial properties, and landscaping sites. Universal SSQA mount.
Canada Availability
TMG Industrial ships from Richmond, BC. National shipping available across Canada.
Key Facts
- Working width: 84 inches
- Weight: 880 lbs
- Load capacity: 1,500 lbs
- Cutting edge: Bolt-on high-tensile steel
- Interior ribs: Engineered-in reinforcement
- Rear cutouts: Operator visibility windows
- Mount: Universal SSQA
- Application: Snow removal, mulch/wood chip handling, light material moving
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
✅ Buy if…
- You move high-volume, low-density material: mulch, wood chips, snow, or loose compost
- You want more cubic yards per pass without exceeding your machine's weight limit
⛔ Skip if…
- Your material is heavy (gravel, soil, rock) — the thin bucket walls will wear fast
- You need a bucket that doubles for digging or grading
🔍 Also consider…
- GP bucket if you split time between light and heavy material
- Snow pusher if snow moving is your primary winter task
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/tmg-sn84-snow-bucket/
