Cat Work Tools Large Skid Steer Cement MixerPremium
🟢 Standard Flow
View on cat.com →
Overview
The Cat Work Tools Large Skid Steer Cement Mixer mixes concrete, mortar, and grout directly on Canadian job sites using the skid steer's hydraulic system to rotate the drum. Cat attachments are available through Canadian equipment dealers and distributors. On-site mixing reduces waste and delivery costs compared to ready-mix trucks for small pours — footings, posts, small slabs. Mounts via universal SSQA. Available through Cat Work Tools dealers across Canada.
Canada Availability
Available through Cat Work Tools dealers across Canada.
Key Facts
- Brand: Cat Work Tools
- Type: large hydraulic cement mixer
- Drive: hydraulic gear motor
- Mount: Cat quick attach (BOCE)
- Application: production concrete mixing, multiple footings, foundations
- Weight: 500–1200 lbs
- Hydraulic flow: 10–20 GPM
Is This Right For You?
✅ Buy if…
- You pour continuous large batches — footings, columns, or multiple structures in sequence
- Your crew does daily concrete work and needs a mixer that can keep up with demand all day
- Large-frame skid steer with adequate hydraulic flow to power the drum continuously
⛔ Skip if…
- You pour occasional small batches — a standard mixer handles that without the extra weight and cost
- Your machine is compact or mid-frame — a heavy mixer may exceed lift capacity with a full drum
🔍 Also consider…
- Standard cement mixer for occasional or small-batch concrete work
- Concrete hopper for pour-only work where mixing is done elsewhere
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Cat in Canada
Caterpillar attachments are backed by the largest dealer network in Canada, with service centres in every major city. OEM quality with the assurance of nationwide parts and support.
Care & Maintenance
- Pre-wet the drum with water and coarse aggregate before first use and after any idle period — concrete bonds permanently to a dry drum and is nearly impossible to remove once cured
- Flush the drum with water and a handful of gravel immediately after every pour — even 30 minutes of delay can start the curing process on residual concrete
- Grease drum bearing mounts and hydraulic motor drive shaft weekly during active use
- Inspect the drum opening seal for wear and replace before it allows concrete to reach the bearing housing — concrete in the bearing is immediate bearing failure
- Store with the drum oriented to drain — standing water inside the drum rusts the interior and degrades the mixing fins over time
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/cement-mixers/cat-large-cement-mixer/