HLA 84-Inch 6-Way Skid Steer Dozer Blade
🟢 Standard Flow
View on hlaattachments.com →
Overview
HLA Attachments' 84-inch 6-way dozer blade provides full hydraulic angle, tilt, and pitch control for precision finish work on roads, driveways, and construction sites. Manufactured in Ontario, Canada, with Western Canada distribution through GLC Equipment and HLA dealers. The 84-inch blade width suits large-frame machines on broader site grading applications. A Canadian-built option for operators who need a full 6-way blade.
Canada Availability
HLA Attachments are manufactured in Ontario, Canada. Available through GLC Equipment and HLA's dealer network across Western Canada.
Key Facts
- Working width: 84 inches
- Type: 6-way hydraulic dozer blade
- Adjustments: angle, tilt, pitch — all hydraulic
- Application: finish grading, road work, site prep
- Compatible: large-frame skid steers
- Canadian-manufactured
- SSQA skid steer quick attach
- Weight: 475–1400 lbs
- Hydraulic flow: 10–20 GPM
Is This Right For You?
✅ Buy if…
- You need hydraulic angle and tilt for full-control grading, ditch work, or road shaping
- You're a contractor doing regular heavy earthwork where blade control speed pays off
⛔ Skip if…
- Basic site clearing is all you need — the hydraulic tilt circuit adds cost and complexity you won't use
- Your machine doesn't have a third hydraulic circuit — 6-way blades need it
🔍 Also consider…
- 4-way blade if tilt control isn't essential for your work
- Motor grader attachment for high-precision grading work
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
- Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
- Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
- Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
- Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/dozer-blades/hla-6way-blade-84/
