John Deere Worksite Pro DB108 Dozer BladePremium
🟢 Standard Flow
View on brandt.ca →
Overview
The DB108 is a 108-inch (9-foot) straight dozer blade in John Deere's Worksite Pro line — designed for large-frame skid steers doing heavy site prep, road building, and backfill work. At 9 feet, it moves substantial material in each pass and spans wider than the machine's tracks, making it efficient for rough grading large pads. The blade oscillates 5 degrees left or right for basic material management. Dozer blades are for pushing and rough grading — they are not designed for snow plowing (use a snow blade for that). Canadian oilfield, road building, and construction contractors use the DB108 for cut-and-fill work and large site clearing where a GP bucket isn't efficient.
Canada Availability
Available in Canada through Brandt / John Deere Worksite Pro — dealer locations in BC, AB, SK, MB, and ON.
Key Facts
- Width: 108 inches (9 feet)
- Blade oscillation: 5 degrees left or right
- Application: site prep, rough grading, cut-and-fill, road building, large pad construction
- Not designed for snow plowing — use a snow blade for snow work
- No auxiliary hydraulics required for basic operation
- SSQA (universal quick attach) mount
- Compatible with large-frame John Deere skid steers, CTLs, and compact wheel loaders
Is This Right For You?
✅ Buy if…
- You need to push loose material, level rough grade, or backfill trenches on your own property or job sites
- The skid steer you already own can replace a dedicated dozer for light earthwork
⛔ Skip if…
- Finish grading quality matters — a GP bucket backscraping often beats a blade for precision
- Trenching or digging is involved — a blade can't dig, only push
🔍 Also consider…
- Box blade or land plane for finish grading work
- GP bucket for combined digging and moving
🔧 Machine Compatibility
Compatible with compact track loaders and large-frame skid steers (S750+ class). Verify your machine's rated operating capacity (ROC) before ordering.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
- Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
- Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
- Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
- Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/dozer-blades/john-deere-db108-dozer-blade/
