John Deere Worksite Pro DB84 Dozer BladePremium
🟢 Standard Flow
View on brandt.ca →
Overview
An 84-inch hydraulic dozer blade in John Deere's Worksite Pro line. The DB84 turns a skid steer or compact track loader into a compact bulldozer for tasks from clay stripping to finish grading. Hydraulic angle and tilt adjust on the go without leaving the cab — useful when finishing slopes or managing windrows on Canadian oilfield and road-building sites. Comes standard with reversible cutting edge and skid shoes. At 1,550 lb it's the mid-size Worksite Pro dozer option. Available through Brandt.
Canada Availability
Available in Canada through Brandt / John Deere Worksite Pro. Common on Alberta oilfield access road construction and prairie site prep work.
Key Facts
- Blade width: 84 inches (213 cm)
- Blade height: 24 inches
- Weight: 1,550 lb (703 kg)
- Blade type: hydraulic angle and tilt
- Cutting edge: reversible, standard
- Skid shoes: standard
- Mount: Quik-Tatch (SSQA compatible)
- Application: site clearing, road building, finish grading, backfill, clay stripping
- Compatible with John Deere skid steers and compact track loaders
Is This Right For You?
✅ Buy if…
- You need hydraulic angle and tilt for full-control grading, ditch work, or road shaping
- You're a contractor doing regular heavy earthwork where blade control speed pays off
⛔ Skip if…
- Basic site clearing is all you need — the hydraulic tilt circuit adds cost and complexity you won't use
- Your machine doesn't have a third hydraulic circuit — 6-way blades need it
🔍 Also consider…
- 4-way blade if tilt control isn't essential for your work
- Motor grader attachment for high-precision grading work
🔧 Machine Compatibility
Designed for John Deere machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
- Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
- Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
- Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
- Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/dozer-blades/john-deere-db84-dozer-blade/
