Werk-Brau 84-Inch Dozer Blade for Skid Steers
🟢 Standard Flow
View on werk-brau.com →
Overview
Werk-Brau's 84-inch straight dozer blade is engineered for heavy-duty grading, backfilling, and material spreading on demanding Canadian construction and road building sites. Heavier-gauge steel than many entry-level blades, with a bolt-on replaceable cutting edge. Werk-Brau blades are trusted on commercial job sites where durability matters. Available through authorized Canadian equipment dealers.
Canada Availability
Available in Canada through authorized Werk-Brau dealers.
Key Facts
- Working width: 84 inches
- Type: straight dozer blade
- Construction: heavy-gauge steel, bolt-on replaceable cutting edge
- Application: grading, road building, backfilling
- Mount: universal skid steer quick attach (SSQA)
- Weight: 475–1400 lbs
- Hydraulic flow: N/A - passive attachment
Is This Right For You?
✅ Buy if…
- You push material forward in a straight line: stockpile cleanup, rough site clearing, or road building
- You need basic grading on unpaved surfaces and already own or operate a skid steer
⛔ Skip if…
- Angle control or cast direction matters — a 4-way or 6-way blade is worth the upgrade for that work
- Finish grading is your goal — a box blade or land plane gives you far more control of the final surface
🔍 Also consider…
- 4-way or 6-way dozer blade if you need angle control
- Box blade or land plane if finish grading is the primary task
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Werk-Brau in Canada
Werk-Brau is a well-established US manufacturer with decades of experience building excavator and skid steer attachments. Their products reach Canadian buyers through a solid dealer and distributor network.
Care & Maintenance
- Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
- Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
- Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
- Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
- Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/dozer-blades/werk-brau-dozer-blade-84/
