Baumalight FM288 Skid Steer Flail Mower⭐ Premium
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
View on baumalight.com →
Overview
Baumalight's FM288 is a heavy-duty 88-inch skid steer flail mower designed for high-production mowing on large parcels, road allowances, and commercial right-of-way maintenance. The wide 88-inch rotor requires 18–35 GPM and is suited to large-frame or high-flow skid steers. Flail teeth stay contained on impact for safer operation near structures and traffic. Built in Aylmer, Ontario, with Canadian dealer support.
Canada Availability
Canadian-manufactured by Baumalight in Aylmer, Ontario. Available direct from Baumalight and through their Canadian dealer network.
Key Facts
- Model: FM288
- Working width: 88 inches
- Type: heavy-duty skid steer flail mower
- Drive: high-flow hydraulic
- Flow requirement: 18–35 GPM
- Flail tooth type: F2000 series (F3000 upgrade optional)
- Application: right-of-way, road allowance, large-area mowing
- Canadian-manufactured
- SSQA skid steer quick attach
Is This Right For You?
✅ Buy if…
- You're processing heavy brush, overgrown saplings, and thick vegetation that standard-flow flails can't handle
- Your machine has high-flow hydraulics and you want the productivity gain on large acreage or contract work
- You're doing reclamation, right-of-way clearing, or heavy vegetation management regularly
⛔ Skip if…
- Your machine is standard-flow — high-flow flails won't perform better and may overheat
- Light grass mowing is your primary use — a standard flail mower is simpler and less expensive
🔍 Also consider…
- Standard flail mower for light-to-medium vegetation on standard-flow machines
- Brush mulcher for woody material over 4 inches that high-flow flails still struggle with
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Best suited to large-frame machines (S750+ class or equivalent CTL).
About Baumalight in Canada
Baumalight is a Canadian manufacturer based in Ontario, producing forestry and land clearing attachments for Canadian conditions. Buying Baumalight means buying Canadian — local warranty support, parts, and engineering.
Care & Maintenance
- Inspect all flail hammers before every use — broken or missing hammers unbalance the rotor; a single missing hammer at high RPM creates destructive vibration
- Replace flail hammers in matched sets to maintain rotor balance — even one missing hammer causes vibration that damages drive motor bearings
- Grease rotor shaft bearing housings after every 8 hours of cutting
- Remove wrapped wire, twine, and root material from around the rotor shaft after every session — wrapped material cuts through shaft seals and causes bearing contamination
- Check the hydraulic motor case drain line for leakage after extended work in thick material — a restricted drain causes shaft seal failure and catastrophic motor damage
How to Connect
- Attach frame using Bob-Tach
- Connect high-flow hydraulic couplers
- Run rotor at idle for 20 seconds before engaging full speed
- Test stall protection if equipped
⚠ Safety NoteKeep bystanders 100m+ clear. Flying debris is serious risk.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/flail-mowers/baumalight-fm288-flail-mower/
