TMG-SFM60 60-Inch Flail Mower for Skid SteersBudget
🟡 High Flow
View on tmgindustrial.ca →
Overview
The TMG-SFM60 is a 60-inch hydraulic flail mower for mid-frame skid steers doing pasture management, brush clearing, and right-of-way vegetation control. The flail rotor handles standing grass, weeds, and moderate brush, returning cut material as mulch rather than throwing debris. The 60-inch cutting width is a common match for standard-flow machines in the 60–75 HP range. Works on slopes and uneven terrain where a rigid deck rotary cutter would scalp. Available direct from TMG Industrial Canada with Canadian shipping.
Canada Availability
Available direct from TMG Industrial Canada (tmgindustrial.ca).
Key Facts
- Model: TMG-SFM60
- Working width: 60 inches
- Type: hydraulic flail mower
- Drive: high-flow hydraulic
- Application: brush, pasture maintenance
- Mount: universal SSQA
- Weight: 575–1500 lbs
- Hydraulic flow: 20–30 GPM
Is This Right For You?
✅ Buy if…
- You mow ditches, roadsides, pastures, or acreage where contained discharge matters — flails don't throw rocks
- Golf courses, parks, municipal rights-of-way, or any site where flying debris risk is a concern
- You want a mulching cut rather than a raw-discharge mow — flails produce finer material
⛔ Skip if…
- Pure production speed is your goal and debris risk is low — a rotary cutter covers more ground per hour
- Heavy brush over 3 inches is your main vegetation — a brush cutter or mulcher handles that range better
🔍 Also consider…
- Rotary cutter for faster coverage on low-risk open land
- Brush mulcher for heavy overgrowth and woody vegetation
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Inspect all flail hammers before every use — broken or missing hammers unbalance the rotor; a single missing hammer at high RPM creates destructive vibration
- Replace flail hammers in matched sets to maintain rotor balance — even one missing hammer causes vibration that damages drive motor bearings
- Grease rotor shaft bearing housings after every 8 hours of cutting
- Remove wrapped wire, twine, and root material from around the rotor shaft after every session — wrapped material cuts through shaft seals and causes bearing contamination
- Check the hydraulic motor case drain line for leakage after extended work in thick material — a restricted drain causes shaft seal failure and catastrophic motor damage
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/flail-mowers/tmg-sfm60-flail-mower/
