HLA 96-Inch Brush Grapple for Large Skid Steers🔵 Mid
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✓ Fits most skid steers, including small-frame
View on hlaattachments.com →
Overview
HLA Attachments' 96-inch brush grapple is a large-frame land clearing tool for capturing and moving bulk brush and debris piles. The wide hydraulic grapple frame handles the large material volumes common in Canadian agricultural land clearing and site development. Ontario-manufactured. Available through HLA dealers.
Canada Availability
Available in Canada through HLA Attachments dealers. Ontario-manufactured.
Key Facts
- Working width: 96 inches
- Type: brush grapple
- Drive: hydraulic
- Application: bulk brush, debris, land clearing
- Mount: universal SSQA
- Typical weight: 750–950 lbs
- Hydraulic flow: 15–25 GPM (standard flow) for open/close cylinders
Is This Right For You?
✅ Buy if…
- You clear brush, saplings, slash, and debris that a bucket can't grip
- You work on land clearing, right-of-way maintenance, or post-harvest cleanup
⛔ Skip if…
- You move dense solid loads like rock, sand, or gravel — a grapple loses material through the tines
- Your primary task is loading trucks — a GP bucket is faster for dense material
🔍 Also consider…
- Industrial grapple if you also handle large rocks or demolition debris
- Stump grinder if stump removal is part of the job
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Best suited to large-frame machines (S750+ class or equivalent CTL).
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Grease all pivot points every 8 hours of operation — this single habit extends service life more than any other maintenance step
- Inspect tines for bending or cracking after use in rock or demolition debris — bent tines cause uneven closing force and can fail under load
- Check hydraulic hose connections and fittings weekly — grapple hoses take more abuse than most attachments due to constant jaw cycling near rough material
- Inspect cylinder pins and bushings monthly; sloppiness in the jaws indicates worn bushings, not just general age — replace before the pin starts wearing the bore
- Store with jaws closed to reduce stress on the frame and keep the hinge pivot pins from accumulating debris
How to Connect
- Mount using same Bob-Tach process as buckets
- Connect hydraulic couplers (depressurized — release aux hydraulics first)
- Verify open/close direction at idle before working
- Test grapple open/close 3× before lifting any load
⚠ Safety NoteConnect hydraulic lines before mounting to machine where possible
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/grapples/hla-brush-grapple-96/
