IronBull 60-Inch Root Grapple for Skid Steers💚 Budget
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✓ Fits most skid steers, including small-frame
View on ironbullinc.com →
Overview
The IronBull 60-inch root grapple is a hydraulic clamping grapple for land clearing, brush removal, and stump handling on compact job sites. Two 3000 PSI cylinders provide closing force for grabbing stumps, brush piles, and tangled debris. Greaseable pins and bushings with hose spring protection. Universal SSQA mount. Available direct through IronBull Canada. A value-priced import grapple for Canadian operators doing occasional land clearing who don't need a heavy-duty commercial-grade unit.
Canada Availability
Available in Canada through IronBull dealers.
Key Facts
- Working width: 60 inches
- Type: root grapple
- Drive: hydraulic
- Application: brush, stumps, land clearing
- Mount: universal SSQA
- Typical weight: 400–500 lbs
- Hydraulic flow: 15–25 GPM (standard flow) for open/close cylinders
Is This Right For You?
✅ Buy if…
- You clear brush, saplings, slash, and debris that a bucket can't grip
- You work on land clearing, right-of-way maintenance, or post-harvest cleanup
⛔ Skip if…
- You move dense solid loads like rock, sand, or gravel — a grapple loses material through the tines
- Your primary task is loading trucks — a GP bucket is faster for dense material
🔍 Also consider…
- Industrial grapple if you also handle large rocks or demolition debris
- Stump grinder if stump removal is part of the job
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About IronBull in Canada
IronBull attachments are distributed across Canada through online and dealer channels, offering competitive pricing on workhorse models suited to farm, construction, and municipal use.
Care & Maintenance
- Grease all pivot points every 8 hours of operation — this single habit extends service life more than any other maintenance step
- Inspect tines for bending or cracking after use in rock or demolition debris — bent tines cause uneven closing force and can fail under load
- Check hydraulic hose connections and fittings weekly — grapple hoses take more abuse than most attachments due to constant jaw cycling near rough material
- Inspect cylinder pins and bushings monthly; sloppiness in the jaws indicates worn bushings, not just general age — replace before the pin starts wearing the bore
- Store with jaws closed to reduce stress on the frame and keep the hinge pivot pins from accumulating debris
How to Connect
- Mount using same Bob-Tach process as buckets
- Connect hydraulic couplers (depressurized — release aux hydraulics first)
- Verify open/close direction at idle before working
- Test grapple open/close 3× before lifting any load
⚠ Safety NoteConnect hydraulic lines before mounting to machine where possible
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/grapples/ironbull-root-grapple-60-ib/
