HLA Scrap Grapple Bucket 54-Inch Skid Steer🔵 Mid
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✓ Fits most skid steers, including small-frame
View on tagequipment.ca →
Overview
HLA's 54-inch scrap grapple bucket has two independent grapple arms for handling awkward, abrasive scrap, demolition debris, mixed waste, and difficult loads that single-arm grapples struggle with. At 31 inches overall height and 34 inches deep, it captures good load volume per cycle. Cylinders and hoses included. Available in widths from 54 to 78 inches — this 54-inch model suits compact and mid-size skid steers. Made in Canada by Horst Welding.
Canada Availability
Made in Canada by HLA Attachments (Horst Welding). Available through TAG Equipment and other Canadian HLA dealers.
Key Facts
- Width: 54 inches
- Overall height: 31 inches
- Overall depth: 34 inches
- Grapple arms: two independent
- Cylinders: included with hoses
- Application: scrap, demolition debris, mixed waste, abrasive loads
- Made in Canada
- Typical weight: 400–500 lbs
- Hydraulic flow: 15–25 GPM (standard flow) for open/close cylinders
Is This Right For You?
✅ Buy if…
- You need more versatility than a bucket — grab, hold, and move irregular loads
- You clear brush, debris, or demolition material where a bucket loses control of the load
⛔ Skip if…
- Dense, uniform material (gravel, sand, soil) is better handled by a GP bucket with more capacity per cycle
- The grapple weight would push you near your machine's ROC limit with this load type
🔍 Also consider…
- GP bucket for high-volume dense material work
- Root grapple for brush-heavy clearing jobs
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Grease all pivot points every 8 hours of operation — this single habit extends service life more than any other maintenance step
- Inspect tines for bending or cracking after use in rock or demolition debris — bent tines cause uneven closing force and can fail under load
- Check hydraulic hose connections and fittings weekly — grapple hoses take more abuse than most attachments due to constant jaw cycling near rough material
- Inspect cylinder pins and bushings monthly; sloppiness in the jaws indicates worn bushings, not just general age — replace before the pin starts wearing the bore
- Store with jaws closed to reduce stress on the frame and keep the hinge pivot pins from accumulating debris
How to Connect
- Mount using same Bob-Tach process as buckets
- Connect hydraulic couplers (depressurized — release aux hydraulics first)
- Verify open/close direction at idle before working
- Test grapple open/close 3× before lifting any load
⚠ Safety NoteConnect hydraulic lines before mounting to machine where possible
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/grapples/tag-hla-scrap-grapple-54/
