Virnig V50 STG84 Skeleton Tine Grapple for Skid Steers🔵 Mid
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
View on virnigmfg.com →
Overview
The Virnig V50 STG84 is an 86-inch overall width skeleton tine grapple — the second-widest model in Virnig's V50 series. It's designed for skid steers and compact track loaders with a minimum 1,500 lb loader capacity. The 86-inch width covers more debris area per grab than the STG72 or STG78 models, useful for Canadian land clearing operations handling large brush piles and log debris. Dual serrated tines with a 9.3-inch gap handle bulk material efficiently.
Canada Availability
Virnig ships to Canada and has Canadian dealer coverage.
Key Facts
- Model: STG84
- Overall width: 86 inches
- Overall depth: 36.5 inches
- Height: 21.1 inches
- Number of tines: 2 (dual jaw)
- Space between tines: 9.3 inches
- Tine tip type: serrated
- Grapple jaw opening: 36.4 inches
- Weight: approximately 1,010 lbs
- Recommended loader capacity: greater than 1,500 lbs
- Hydraulic flow: 15–25 GPM (standard flow) for open/close cylinders
Is This Right For You?
✅ Buy if…
- You handle large boulders, rip-rap, or irregular rock that a bucket can't safely grip
- You work in quarrying, shoreline work, or heavy land clearing
⛔ Skip if…
- Your rock is small and uniform — a rock bucket moves volume faster
- You need to sort debris — a grapple with fingers works better for mixed piles
🔍 Also consider…
- Industrial grapple for mixed debris with some rock
- Rock bucket if you're loading and moving more than sorting
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Best suited to large-frame machines (S750+ class or equivalent CTL).
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Grease all pivot points every 8 hours of operation — this single habit extends service life more than any other maintenance step
- Inspect tines for bending or cracking after use in rock or demolition debris — bent tines cause uneven closing force and can fail under load
- Check hydraulic hose connections and fittings weekly — grapple hoses take more abuse than most attachments due to constant jaw cycling near rough material
- Inspect cylinder pins and bushings monthly; sloppiness in the jaws indicates worn bushings, not just general age — replace before the pin starts wearing the bore
- Store with jaws closed to reduce stress on the frame and keep the hinge pivot pins from accumulating debris
How to Connect
- Mount using same Bob-Tach process as buckets
- Connect hydraulic couplers (depressurized — release aux hydraulics first)
- Verify open/close direction at idle before working
- Test grapple open/close 3× before lifting any load
⚠ Safety NoteConnect hydraulic lines before mounting to machine where possible
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/grapples/virnig-v50-stg84-grapple/
