Virnig V60 72-Inch Bale Grapple🔵 Mid
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✓ Fits most skid steers, including small-frame
View on virnigmfg.com →
Overview
The Virnig V60 72-inch bale grapple is designed for moving round and square bales on farms and feedlots. The tine spacing and jaw pressure are calibrated for secure bale handling without punching through the bale wrap. Virnig's V60 line is their standard full-size skid steer series with a strong reputation for build quality. Ships to Canada through authorized North American dealers.
Canada Availability
Virnig attachments ship to Canada and are available through authorized North American dealers.
Key Facts
- Model: V60 Bale Grapple
- Width: 72 inches
- Type: round/square bale grapple
- Drive: hydraulic
- Application: bale handling, farm and feedlot operations
- Compatible: full-size skid steers with SSQA mount
- Typical weight: 500–650 lbs
- Hydraulic flow: 15–25 GPM (standard flow) for open/close cylinders
Is This Right For You?
✅ Buy if…
- You move mixed demolition debris, large rocks, and heavy loads that need a closed floor
- You sort materials on-site between loads
⛔ Skip if…
- Your primary use is brush and slash cleanup — a root grapple's open tines handle that better
- The added weight pushes near your machine's ROC limit for lighter machines
🔍 Also consider…
- Root grapple for lighter brush and debris work
- 4-in-1 bucket if you need both clamshell and flat-floor functionality
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Grease all pivot points every 8 hours of operation — this single habit extends service life more than any other maintenance step
- Inspect tines for bending or cracking after use in rock or demolition debris — bent tines cause uneven closing force and can fail under load
- Check hydraulic hose connections and fittings weekly — grapple hoses take more abuse than most attachments due to constant jaw cycling near rough material
- Inspect cylinder pins and bushings monthly; sloppiness in the jaws indicates worn bushings, not just general age — replace before the pin starts wearing the bore
- Store with jaws closed to reduce stress on the frame and keep the hinge pivot pins from accumulating debris
How to Connect
- Mount using same Bob-Tach process as buckets
- Connect hydraulic couplers (depressurized — release aux hydraulics first)
- Verify open/close direction at idle before working
- Test grapple open/close 3× before lifting any load
⚠ Safety NoteConnect hydraulic lines before mounting to machine where possible
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/grapples/virnig-v60-bale-grapple-72/
