Rammer S23 Compact Hydraulic Breaker🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on rammer.com →
Overview
The Rammer S23 Compact Hydraulic Breaker demolishes concrete slabs, asphalt, rock faces, and frozen ground that buckets cannot penetrate. Rammer attachments are available through Canadian equipment dealers and distributors. Impact energy and blow rate determine performance on hard material; match the breaker class to your machine's auxiliary hydraulic output. Used extensively on Canadian construction and utility sites. Available through Rammer/Sandvik dealers in Canada.
Canada Availability
Available through Rammer/Sandvik dealers in Canada.
Key Facts
- Model: Rammer S23
- Brand: Rammer (Sandvik Group)
- Type: compact hydraulic breaker, G-Dampening
- Class: compact frame
- Application: light demolition, compact machine use
- Weight: 500–900 lbs
- Hydraulic flow: 8–20 GPM
✅ Specs sourced from rammer.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You break concrete curbs, asphalt patches, frost, or light stone on compact to medium skid steers
- Occasional demolition is part of your work mix and you want a simple, reliable hammer without high cost
- Your machine has standard hydraulic flow — light-duty breakers don't require high-flow circuits
⛔ Skip if…
- Reinforced concrete foundations or large rock are your main targets — a medium or heavy hammer is needed
- You run a large-frame machine — a light-duty breaker is undersized and won't give adequate productivity
🔍 Also consider…
- Medium-duty hydraulic breaker for larger machines and harder material
- Heavy-duty breaker for large-frame machines and heavy demolition
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Rammer in Canada
Rammer is a Finnish manufacturer of hydraulic breakers (part of the Sandvik group) and one of the most recognized names in professional demolition and construction tooling. Rammer breakers are available through authorized dealers in Canada with support from Sandvik's national service network.
Care & Maintenance
- Check nitrogen buffer gas pressure at the start of every season and whenever impact energy feels reduced — low gas pressure is the most common cause of reduced performance
- Lubricate the tool (chisel) bushing and retainer pins before every use — dry bushings accelerate side-loading wear on both the bushing and the tool shank
- Inspect the lower bushing for wear after every 40 hours — a worn bushing allows chisel wobble, reducing impact energy delivery and accelerating shank wear
- Never blank-fire the breaker — operating without material contact destroys the internal valve in minutes; this is the most common cause of breaker failures
- Verify return-line back-pressure annually — back-pressure exceeding the breaker's rated limit destroys the valve seal progressively and may not be immediately obvious
How to Connect
- Attach breaker using Bob-Tach
- Connect single aux hydraulic circuit (breakers use one-way flow)
- Set machine to single-action aux mode if available
- Run 5 seconds at idle before working to allow oil to circulate
⚠ Safety NoteBreakers use single-direction flow. Do not run breaker in same position for more than 30 seconds — move to avoid blank-firing damage.
⚒️ Before You Buy a Hydraulic Breaker
Breaker sizing and hydraulic matching are critical — an oversized or underpowered breaker wears out faster and can damage your machine.
- Size the breaker class to your machine's rated operating capacity (ROC) Breaker sizing guide →
- Verify your machine's GPM and PSI output match the breaker's requirement Hydraulic flow guide →
- Confirm anti-blank-fire protection — protects both the breaker and your machine
Find a Breaker Dealer →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/hydraulic-breakers/rammer-s23-hydraulic-breaker/
Ready to Buy? Check These First
⚙️
Confirm Machine Fit
Verify your machine's hydraulic flow meets this attachment's requirements before ordering. High-flow attachments need 25–45+ GPM — standard flow machines won't run them properly.
Check your machine's flow →
🇨🇦
Find a Canadian Dealer
Buy through a Canadian dealer for warranty support, parts, and service. Avoid grey-market imports on high-ticket attachments.
Find dealers by province →
