HLA 36-Inch Land Plane for Mini Skid Steers🔵 Mid
✓ No hydraulics required
✓ Fits most skid steers, including small-frame
View on hlaattachments.com →
Overview
The HLA 36-inch Land Plane is a compact floating-blade skid steer land plane for mini and compact machines maintaining laneways, paths, and small driveways. The floating blade follows ground contours for smooth, even grading without requiring auxiliary hydraulics. Ontario-manufactured by Horst Welding. Available direct from HLA Attachments — one of Canada's only domestic skid steer attachment manufacturers, with nationwide shipping and Ontario-based parts support.
Canada Availability
Available in Canada through HLA Attachments dealers. Ontario-manufactured.
Key Facts
- Working width: 36 inches
- Type: floating blade land plane
- Hydraulics: float only
- Mount: universal SSQA
- Weight: 375–1125 lbs
- Hydraulic flow: N/A - passive attachment
Is This Right For You?
✅ Buy if…
- You maintain gravel driveways, rural roads, acreage laneways, or field access roads with a skid steer
- Float mode is available on your machine — landplanes need to float to follow the contour of the ground
⛔ Skip if…
- Your surface is hardpan or frozen — a land plane rides on top of hard surfaces and doesn't cut into them
- You need to move large volumes of material — a land plane redistributes existing material, it doesn't load and dump
🔍 Also consider…
- Box blade for primary grading before final land plane pass
- Dozer blade if you need to push material rather than float and level
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Inspect the floating blade for wear — sharp edges level properly; a worn-smooth edge scrapes without cutting and leaves a rough surface
- Lubricate blade hinge and float mechanism pivot pins each season — seized float pivots defeat the purpose of the attachment
- Check scarifier shanks for tooth wear or breakage before each use — a missing shank puts lateral load on adjacent shanks and the boom
- After use in mud or clay, clean accumulated material from the blade housing — dried clay adds uneven weight and prevents proper floating
- Inspect blade-mounting welds for cracking at season start — the float mechanism amplifies vertical stress on the mounting hardware over time
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (some are passive/manual)
- Set cutting angle before working (typically 0-5° for finish grade)
⚠ Safety NoteLandplanes are mostly passive attachments. Float mode on machine recommended for finish work.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/landplanes/hla-land-plane-36/
