IronBull 84-Inch Land Plane for Skid Steers💚 Budget
✓ No hydraulics required
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on ironbull.ca →
Overview
IronBull's 84-inch land plane is a wide-format box blade grader for full-size skid steers maintaining wider driveway lanes, gravel roads, and large feedlot areas. The 84-inch cutting width covers more ground per pass, making it efficient for contractors maintaining multiple properties or longer road sections across Canada. Ships free from IronBull Canada.
Canada Availability
Available direct from IronBull Canada (ironbull.ca) with Canadian shipping included.
Key Facts
- Working width: 84 inches
- Type: land plane / box blade grader
- Design: front and rear cutting edges
- Application: wider driveway lanes, gravel roads, feedlot areas
- Mount: universal skid steer quick attach (SSQA)
- Weight: 575–1750 lbs
- Hydraulic flow: N/A - passive attachment
✅ Specs sourced from ironbull.ca · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You maintain gravel driveways, rural roads, acreage laneways, or field access roads with a skid steer
- Float mode is available on your machine — landplanes need to float to follow the contour of the ground
⛔ Skip if…
- Your surface is hardpan or frozen — a land plane rides on top of hard surfaces and doesn't cut into them
- You need to move large volumes of material — a land plane redistributes existing material, it doesn't load and dump
🔍 Also consider…
- Box blade for primary grading before final land plane pass
- Dozer blade if you need to push material rather than float and level
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About IronBull in Canada
IronBull attachments are distributed across Canada through online and dealer channels, offering competitive pricing on workhorse models suited to farm, construction, and municipal use.
Care & Maintenance
- Inspect the floating blade for wear — sharp edges level properly; a worn-smooth edge scrapes without cutting and leaves a rough surface
- Lubricate blade hinge and float mechanism pivot pins each season — seized float pivots defeat the purpose of the attachment
- Check scarifier shanks for tooth wear or breakage before each use — a missing shank puts lateral load on adjacent shanks and the boom
- After use in mud or clay, clean accumulated material from the blade housing — dried clay adds uneven weight and prevents proper floating
- Inspect blade-mounting welds for cracking at season start — the float mechanism amplifies vertical stress on the mounting hardware over time
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (some are passive/manual)
- Set cutting angle before working (typically 0-5° for finish grade)
⚠ Safety NoteLandplanes are mostly passive attachments. Float mode on machine recommended for finish work.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/landplanes/ironbull-land-plane-84/
