John Deere Worksite Pro LP84 Landplane🔵 Mid
✓ No hydraulics required
View on brandt.ca →
Overview
An 84-inch landplane in John Deere's Worksite Pro line. The wider cut makes it more efficient on longer driveways and open rural roads where the extra pass width reduces total number of passes needed. Same floating blade system as the LP72 — cuts high, fills low, levels in one pass without bridging. A practical choice for SK and AB acreage owners maintaining longer gravel road sections. No aux hydraulics required.
Canada Availability
Available in Canada through Brandt / John Deere Worksite Pro. Particularly common in Alberta and Saskatchewan where acreage road maintenance is a standard seasonal task.
Key Facts
- Working width: 84 inches (213 cm)
- Floating blade design for cut-and-fill in one pass
- No auxiliary hydraulics required
- Application: rural road grading, long driveway maintenance, site levelling
- Wider working width than LP72 — fewer passes on open ground
- Compatible with John Deere skid steers and compact track loaders with SSQA mount
✅ Specs sourced from brandt.ca · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You maintain gravel driveways, rural roads, acreage laneways, or field access roads with a skid steer
- Float mode is available on your machine — landplanes need to float to follow the contour of the ground
⛔ Skip if…
- Your surface is hardpan or frozen — a land plane rides on top of hard surfaces and doesn't cut into them
- You need to move large volumes of material — a land plane redistributes existing material, it doesn't load and dump
🔍 Also consider…
- Box blade for primary grading before final land plane pass
- Dozer blade if you need to push material rather than float and level
🔧 Machine Compatibility
Designed for John Deere machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Inspect the floating blade for wear — sharp edges level properly; a worn-smooth edge scrapes without cutting and leaves a rough surface
- Lubricate blade hinge and float mechanism pivot pins each season — seized float pivots defeat the purpose of the attachment
- Check scarifier shanks for tooth wear or breakage before each use — a missing shank puts lateral load on adjacent shanks and the boom
- After use in mud or clay, clean accumulated material from the blade housing — dried clay adds uneven weight and prevents proper floating
- Inspect blade-mounting welds for cracking at season start — the float mechanism amplifies vertical stress on the mounting hardware over time
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (some are passive/manual)
- Set cutting angle before working (typically 0-5° for finish grade)
⚠ Safety NoteLandplanes are mostly passive attachments. Float mode on machine recommended for finish work.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/landplanes/john-deere-lp84/
