Virnig V60 96-Inch Land Plane for Skid Steers🔵 Mid
✓ No hydraulics required
⚠ Too heavy for most small-frame machines
✓ Best on mid-frame or large-frame machines
View on virnig.com →
Overview
Virnig Manufacturing's V60 96-inch land plane is a large-format box blade grader for full-size skid steers grading gravel roads, wide driveway lanes, and open flat areas. The 96-inch cutting width covers more ground per pass than the 84-inch model, making it suited for road maintenance operations. Part of Virnig's V60 series for high-flow, high-output machines. Available through authorized Canadian Virnig dealers.
Canada Availability
Available in Canada through authorized Virnig Manufacturing dealers.
Key Facts
- Working width: 96 inches (8 feet)
- Model series: V60
- Type: land plane / box blade grader
- Application: gravel road maintenance, driveway lanes, large flat areas
- Mount: universal skid steer quick attach (SSQA)
- Weight: 675–2000 lbs
- Hydraulic flow: N/A - passive attachment
✅ Specs sourced from virnig.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You maintain gravel driveways, rural roads, acreage laneways, or field access roads with a skid steer
- Float mode is available on your machine — landplanes need to float to follow the contour of the ground
⛔ Skip if…
- Your surface is hardpan or frozen — a land plane rides on top of hard surfaces and doesn't cut into them
- You need to move large volumes of material — a land plane redistributes existing material, it doesn't load and dump
🔍 Also consider…
- Box blade for primary grading before final land plane pass
- Dozer blade if you need to push material rather than float and level
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Inspect the floating blade for wear — sharp edges level properly; a worn-smooth edge scrapes without cutting and leaves a rough surface
- Lubricate blade hinge and float mechanism pivot pins each season — seized float pivots defeat the purpose of the attachment
- Check scarifier shanks for tooth wear or breakage before each use — a missing shank puts lateral load on adjacent shanks and the boom
- After use in mud or clay, clean accumulated material from the blade housing — dried clay adds uneven weight and prevents proper floating
- Inspect blade-mounting welds for cracking at season start — the float mechanism amplifies vertical stress on the mounting hardware over time
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (some are passive/manual)
- Set cutting angle before working (typically 0-5° for finish grade)
⚠ Safety NoteLandplanes are mostly passive attachments. Float mode on machine recommended for finish work.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/landplanes/virnig-v60-land-plane-96/
