Werk-Brau 72-Inch Land Plane for Skid Steers🔵 Mid
✓ No hydraulics required
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on werk-brau.com →
Overview
Werk-Brau's 72-inch land plane is a finish-grading attachment for skid steers used on driveways, feedlot lanes, and gravel roads. The box-blade design captures material on both the front and rear scraping edges for efficient cut-and-fill grading. The 72-inch width suits mid-size operations. Built to Werk-Brau's North American industrial standards. Available through authorized Canadian dealers.
Canada Availability
Available in Canada through authorized Werk-Brau dealers.
Key Facts
- Working width: 72 inches
- Type: land plane / box blade grader
- Design: dual cutting edges (front and rear)
- Application: driveway grading, feedlot lanes, gravel roads
- Mount: universal skid steer quick attach (SSQA)
- Weight: 500–1500 lbs
- Hydraulic flow: N/A - passive attachment
Is This Right For You?
✅ Buy if…
- You maintain gravel driveways, rural roads, acreage laneways, or field access roads with a skid steer
- Float mode is available on your machine — landplanes need to float to follow the contour of the ground
⛔ Skip if…
- Your surface is hardpan or frozen — a land plane rides on top of hard surfaces and doesn't cut into them
- You need to move large volumes of material — a land plane redistributes existing material, it doesn't load and dump
🔍 Also consider…
- Box blade for primary grading before final land plane pass
- Dozer blade if you need to push material rather than float and level
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Werk-Brau in Canada
Werk-Brau is a well-established US manufacturer with decades of experience building excavator and skid steer attachments. Their products reach Canadian buyers through a solid dealer and distributor network.
Care & Maintenance
- Inspect the floating blade for wear — sharp edges level properly; a worn-smooth edge scrapes without cutting and leaves a rough surface
- Lubricate blade hinge and float mechanism pivot pins each season — seized float pivots defeat the purpose of the attachment
- Check scarifier shanks for tooth wear or breakage before each use — a missing shank puts lateral load on adjacent shanks and the boom
- After use in mud or clay, clean accumulated material from the blade housing — dried clay adds uneven weight and prevents proper floating
- Inspect blade-mounting welds for cracking at season start — the float mechanism amplifies vertical stress on the mounting hardware over time
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (some are passive/manual)
- Set cutting angle before working (typically 0-5° for finish grade)
⚠ Safety NoteLandplanes are mostly passive attachments. Float mode on machine recommended for finish work.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/landplanes/werk-brau-land-plane-72/
