Baumalight MP260 Skid Steer Brush Mulcher⭐ Premium
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✗ Too heavy for small & mid-frame machines
✓ Requires large-frame or XL machine
View on baumalight.com →
Overview
The Baumalight MP260 is a 60-inch skid steer brush mulcher for medium-to-heavy brush clearing and acreage work. The wider rotor makes it more efficient on open areas and longer runs. Baumalight manufactures in Aylmer, Ontario, and distributes directly across Canada. Multiple motor options are available to match machines with different hydraulic output. A practical Canadian-built option for operators doing seasonal brush management.
Canada Availability
Canadian-manufactured by Baumalight in Aylmer, Ontario. Available direct from Baumalight with Canadian shipping and through their dealer network.
Key Facts
- Model: MP260
- Working width: 60 inches
- Type: skid steer brush mulcher
- Drive: high-flow hydraulic
- Multiple motor options for different machine flow rates
- Application: brush clearing, acreage cleanup, right-of-way
- Canadian-manufactured
- SSQA skid steer quick attach
- Weight: 1000–2900 lbs
- Hydraulic flow: 25–45 GPM (high-flow)
Is This Right For You?
✅ Buy if…
- You're processing brush, saplings, and slash in place — drum mulchers handle mixed material up to 6 inches
- Land clearing, pipeline corridor prep, or right-of-way maintenance where material stays on site
- Your machine has the high-flow hydraulics required — drum mulchers typically need 25-35+ GPM
⛔ Skip if…
- Your skid steer is standard-flow — most drum mulchers require high-flow to run efficiently
- Tree diameter exceeds 8 inches regularly — a dedicated forestry mulcher or felling head handles larger material
🔍 Also consider…
- Forestry mulcher for heavier timber and larger diameter material
- Rotary cutter or brush cutter if material size is consistently under 3 inches
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Baumalight in Canada
Baumalight is a Canadian manufacturer based in Ontario, producing forestry and land clearing attachments for Canadian conditions. Buying Baumalight means buying Canadian — local warranty support, parts, and engineering.
Care & Maintenance
- Inspect carbide hammers or teeth before every use — missing or broken hammers unbalance the rotor and can cause catastrophic motor damage at high RPM
- Replace worn teeth in matched sets across the rotor — even one missing hammer creates vibration destructive enough to damage drive motor bearings
- Grease rotor shaft bearing housings every 4–8 hours of operation, or more frequently in dusty or abrasive conditions
- Clean packed fibrous material from the housing interior and rotor after every session — buildup adds asymmetric weight and creates rotor imbalance
- Check the hydraulic motor case drain line monthly for leakage — a restricted or failed case drain causes motor shaft seal failure and internal leakage
How to Connect
- Attach mulcher head using Bob-Tach
- Connect high-flow hydraulic couplers
- Verify rotor direction — debris should eject downward, not toward operator
- Run at idle for 30 seconds before engaging rotor at working speed
⚠ Safety NoteMulchers are high-flow only (25-45 GPM+) — do not run on standard flow machines. Wear full PPE — flying debris risk.
🌲 Before You Buy a Mulcher
Mulchers are high-investment, high-flow attachments — the wrong match to your machine costs you in performance and potentially in repairs.
- Confirm your machine delivers 20–40 GPM high-flow Check your flow spec →
- Match drum vs disc mulcher to your material (trees vs brush) Drum vs disc guide →
- Verify carbide tooth compatibility for your primary soil/rock type
Find a Mulcher Dealer →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/mulchers/baumalight-mp260-mulcher/
Ready to Buy? Check These First
⚙️
Confirm Machine Fit
Verify your machine's hydraulic flow meets this attachment's requirements before ordering. High-flow attachments need 25–45+ GPM — standard flow machines won't run them properly.
Check your machine's flow →
🇨🇦
Find a Canadian Dealer
Buy through a Canadian dealer for warranty support, parts, and service. Avoid grey-market imports on high-ticket attachments.
Find dealers by province →
