Fecon BH074SS High-Flow Mulcher for Skid Steers
🟡 High Flow
View on fecon.com →
Overview
Fecon's BH074SS in high-flow configuration is a 74-inch wide heavy-duty mulcher for large high-flow skid steers on demanding forestry and land clearing operations. This wider version of the Bull Hog covers more ground per pass with higher hydraulic flow. Used by Canadian forestry contractors, pipeline companies, and municipalities for right-of-way and utility corridor maintenance. Available through authorized Fecon dealers in Canada.
Canada Availability
Available in Canada through authorized Fecon dealers.
Key Facts
- Working width: 74 inches
- Model: BH074SS (high-flow)
- Type: heavy-duty forestry mulcher
- Hydraulic requirement: high-flow circuit
- Application: forestry clearing, pipeline right-of-way, utility corridors
- Weight: 1250–3600 lbs
- Hydraulic flow: 25–45 GPM (high-flow)
Is This Right For You?
✅ Buy if…
- You're processing brush, saplings, and slash in place — drum mulchers handle mixed material up to 6 inches
- Land clearing, pipeline corridor prep, or right-of-way maintenance where material stays on site
- Your machine has the high-flow hydraulics required — drum mulchers typically need 25-35+ GPM
⛔ Skip if…
- Your skid steer is standard-flow — most drum mulchers require high-flow to run efficiently
- Tree diameter exceeds 8 inches regularly — a dedicated forestry mulcher or felling head handles larger material
🔍 Also consider…
- Forestry mulcher for heavier timber and larger diameter material
- Rotary cutter or brush cutter if material size is consistently under 3 inches
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Fecon in Canada
Fecon is a US manufacturer specializing in forestry and land clearing equipment. Their Bull Hog and BTX mulching heads are well-regarded by professional land clearing contractors in Canada. Fecon products are available through select Canadian dealers, primarily in regions with active forestry and brush management markets.
Care & Maintenance
- Inspect carbide hammers or teeth before every use — missing or broken hammers unbalance the rotor and can cause catastrophic motor damage at high RPM
- Replace worn teeth in matched sets across the rotor — even one missing hammer creates vibration destructive enough to damage drive motor bearings
- Grease rotor shaft bearing housings every 4–8 hours of operation, or more frequently in dusty or abrasive conditions
- Clean packed fibrous material from the housing interior and rotor after every session — buildup adds asymmetric weight and creates rotor imbalance
- Check the hydraulic motor case drain line monthly for leakage — a restricted or failed case drain causes motor shaft seal failure and internal leakage
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/mulchers/fecon-bh074ss-high-flow-mulcher/
