Bobcat 96-Inch Pallet Forks for Skid SteersPremium
View on bobcat.com →
Overview
Bobcat's 96-inch (8-foot) pallet forks are extra-long tines for handling oversized loads — long lumber bundles, structural steel, and industrial skids that extend well beyond standard 48-inch tines. At 8 feet, these tines provide the reach and load support needed for large industrial and construction material handling on full-size Bobcat machines. Available through Bobcat dealers across Canada.
Canada Availability
Available through Bobcat of Canada dealer network.
Key Facts
- Tine length: 96 inches (8 feet)
- Type: extended heavy-duty pallet forks
- Application: long lumber, structural steel, industrial oversized loads
- Mount: Bobcat Bob-Tach (universal SSQA compatible)
- Suited for: large-frame Bobcat skid steers
- Typical frame weight: 600–750 lbs
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
✅ Buy if…
- You lift pallets, bags, small bundles, or materials up to 4,000 lbs regularly
- Your machine is mid-frame (S450–S570 class) and typical loads are within standard-duty capacity
⛔ Skip if…
- You regularly lift heavy or awkward loads over 5,000 lbs — standard-duty tines can bend under shock loads
- Bin moves, heavy concrete, or steel pipe are common — heavy-duty tines are worth the cost
🔍 Also consider…
- Heavy-duty pallet forks if your load weights push the limit of the frame rating
- Fork frame carriage upgrade if you want a higher ITA carriage class for more lift capacity
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Bobcat in Canada
Bobcat is one of the most recognized skid steer brands in Canada, with a dealer presence in every province. Their OEM attachments are engineered specifically for Bobcat machines but use universal SSQA mounts for cross-brand compatibility.
Care & Maintenance
- Inspect tines weekly for bending, spreading, or cracking — a deformed tine is a structural failure, not cosmetic; take it out of service immediately
- Check tine adjustment pins and stops before every heavy lift — loose pins allow tines to shift under load
- Grease carriage slide bearings and tine clamp mechanisms monthly
- Inspect frame welds for cracking, especially around the top hook and lower receiver bar — these are the highest-stress points on the frame
- Verify load rating labels are legible on the frame; worn or missing labels are a safety compliance issue in commercial and regulated jobsite use
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/pallet-forks/bobcat-pallet-forks-96/
