HLA 84-Inch Hay Handling Fork for Large Skid Steers🔵 Mid
✓ No hydraulics required
✓ Fits most skid steers, including small-frame
View on hlaattachments.com →
Overview
The HLA 84-Inch Hay Handling Fork for Large Skid Steers handles palletized loads, lumber bundles, and baled materials on Canadian farms, construction sites, and acreages. HLA Attachments, headquartered in Elmira, Ontario, is one of Canada's largest domestic attachment manufacturers, with wide dealer coverage across the country. The 84-inch-inch frame fits standard pallet widths, and the tines adjust to handle varied load sizes. SSQA mounting means the forks swap on in minutes without tools. Available in Canada through HLA Attachments dealers. Ontario-manufactured.
Canada Availability
Available in Canada through HLA Attachments dealers. Ontario-manufactured.
Key Facts
- Working width: 84 inches
- Type: hay handling fork
- Application: large round bales, silage, wrapped bales
- Mount: universal SSQA
- Manufacturer: Ontario-made
- Typical frame weight: 400–550 lbs
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
✅ Buy if…
- You lift pallets, bags, small bundles, or materials up to 4,000 lbs regularly
- Your machine is mid-frame (S450–S570 class) and typical loads are within standard-duty capacity
⛔ Skip if…
- You regularly lift heavy or awkward loads over 5,000 lbs — standard-duty tines can bend under shock loads
- Bin moves, heavy concrete, or steel pipe are common — heavy-duty tines are worth the cost
🔍 Also consider…
- Heavy-duty pallet forks if your load weights push the limit of the frame rating
- Fork frame carriage upgrade if you want a higher ITA carriage class for more lift capacity
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Inspect tines weekly for bending, spreading, or cracking — a deformed tine is a structural failure, not cosmetic; take it out of service immediately
- Check tine adjustment pins and stops before every heavy lift — loose pins allow tines to shift under load
- Grease carriage slide bearings and tine clamp mechanisms monthly
- Inspect frame welds for cracking, especially around the top hook and lower receiver bar — these are the highest-stress points on the frame
- Verify load rating labels are legible on the frame; worn or missing labels are a safety compliance issue in commercial and regulated jobsite use
How to Connect
- Slide fork frame onto Bob-Tach receiver arms
- Pull lock levers to engage
- Verify orange indicators locked
- Adjust fork width to load before lifting — most frames allow no-tool width adjustment
⚠ Safety NoteNever exceed the rated capacity of the fork frame — check the frame decal
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/pallet-forks/hla-hay-fork-84/
