HLA HD5554 5500 lb Heavy Duty Pallet Forks with 54-Inch Tines🔵 Mid
✓ No hydraulics required
View on hlaattachments.com →
Overview
The HLA HD5554 is a 5,500 lb heavy duty pallet fork set with 54-inch tines from Ontario-based HLA Attachments. The 54-inch tine is an intermediate length between 48 and 60 inches, suitable for operators who regularly handle wider or deeper pallets that a 48-inch tine can't fully support, without going to the longer 60-inch tine. Class II hook-type frame with 50-inch carriage and sliding adjustable tines.
Canada Availability
Available in Canada through HLA Attachments dealers. Ontario-manufactured by Horst Welding.
Key Facts
- Capacity: 5,500 lbs at 24" load centre
- Tine length: 54 inches
- Tine size: 1-1/2" x 4" Class II hook type solid tines
- Carriage width: 50 inches
- Sliding adjustable tines, lockable in any position
- Weight: approximately 495 lbs
- Includes guard
- SSQA skid steer quick attach mount
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
✅ Buy if…
- You lift pallets, bags, small bundles, or materials up to 4,000 lbs regularly
- Your machine is mid-frame (S450–S570 class) and typical loads are within standard-duty capacity
⛔ Skip if…
- You regularly lift heavy or awkward loads over 5,000 lbs — standard-duty tines can bend under shock loads
- Bin moves, heavy concrete, or steel pipe are common — heavy-duty tines are worth the cost
🔍 Also consider…
- Heavy-duty pallet forks if your load weights push the limit of the frame rating
- Fork frame carriage upgrade if you want a higher ITA carriage class for more lift capacity
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Inspect tines weekly for bending, spreading, or cracking — a deformed tine is a structural failure, not cosmetic; take it out of service immediately
- Check tine adjustment pins and stops before every heavy lift — loose pins allow tines to shift under load
- Grease carriage slide bearings and tine clamp mechanisms monthly
- Inspect frame welds for cracking, especially around the top hook and lower receiver bar — these are the highest-stress points on the frame
- Verify load rating labels are legible on the frame; worn or missing labels are a safety compliance issue in commercial and regulated jobsite use
How to Connect
- Slide fork frame onto Bob-Tach receiver arms
- Pull lock levers to engage
- Verify orange indicators locked
- Adjust fork width to load before lifting — most frames allow no-tool width adjustment
⚠ Safety NoteNever exceed the rated capacity of the fork frame — check the frame decal
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/pallet-forks/hla-hd5554-pallet-forks/
